Print
Information
This guide is for Tablet MAC address. If you need to get HoloLens MAC address, please click here.

MAC address or media access control address is a unique identifier assigned to a network. Every device on the internet has a MAC address, it identifies a device to other devices on the same local network.

To sync a device with FabStation you need to get a MAC address of the device and add it to the FabStation Web portal.

Please follow the steps below to get a MAC address:

1. Make sure FabStation App is installed on the tablet. If it’s not installed, please follow this guide.  

2. Open FabStation App

3. Virtual MAC address can be located by selecting the Settings icon  in the bottom left corner of the screen.

The virtual MAC will be displayed. 

4. Write down the address for adding the tablet hardware to the FabStation software.

Note: If you are syncing multiple devices with FabStation, mind that each of those devices will have a different MAC address.

If you need to sync your device with the FabStation, please follow “Adding Hardware” instructions within Managing Hardware article.